|
PRODUCT OPTIONS: GREEN POL GREY SILVER 53005 In Shop Stock
Description: Dirty Dog Sunglasses are certified to pass the following standards.
European Standard: EN1836 2005 European Common Market (EEC)
USA Standard: ASANSI Z80.3 1996 USA
Australian/New Zealand Standard: AS/NZS 1067: 2006 (Lens Category 3. Sunglasses, High sunglass reduction. Good UV protection)
The European standard EN 1836:2005 has four transmittance ratings: "0" for insufficient UV protection, "2" for sufficient UHV protection, "6" for good UHV protection and "7" for "full" UHVV protection, meaning that no more than 5 % of the 380 nm rays are transmitted. Products which fulfill the standard receive a CE mark. There is no rating for transmittance protection for radiation of up to 400 nm ("UV 400"), as required in other countries (incl. the United States) and recommended by experts.The current standard EN 1836:2005 was preceded by the older standards EN 166:1995 (Personal eye protection –Specifications), EN167: 1995 (Personal eye protection – Optical test methods), and EN168: 1995 (Personal eye protection – Non-optical test methods), which in 2002 were republished as a revised standard under the name of EN 1836:1997 (which included two amendments). In addition to filtering, the standard also lists requirements for minimum robustness, labeling, materials (non-toxic for skin contact and not combustible) and lack of protrusions (to avoid harm when wearing them).
The U.S. standard is ANSI Z80.3-2001, which includes three transmittance categories. According to the ANSI Z80.3-2001 standard, the lens should have a UVB (280 to 315 nm) transmittance of no more than one per cent and a UVA (315 to 380 nm) transmittance of no more than 0.3 times the visual light transmittance. The ANSI Z87.1-2003 standard includes requirements for basic impact and high impact protection. In the basic impact test, a 1 in (2.54 cm) steel ball is dropped on the lens from a height of 50 in (127 cm). In the high velocity test, a 1/4 in (6.35 mm) steel ball is shot at the lens at 150 ft/s (45.72 m/s). To pass both tests, no part of the lens may touch the eye.
The Australian Standard is AS/NZ1067:2003. The five ratings for transmittance (filter) under this standard are based on the amount of absorbed light, 0 to 4, with "0" providing some protection from UV radiation and sunglare, and "4" indicating a high level of protection, but not to be worn when driving. Australia introduced the world's first national standards for sunglasses in 1971. They were subsequently updated and expanded, leading in 1990 to AS 1076.1-1990 Sunglasses and fashion spectacles (incl. Part 1 Safety Requirements and Part 2 Performance Requirements), which was superseded in 2003 by AS/NZ1067:2003. The 2003 update made the Australian standard relatively similar to the European standard. This step opened the European market to Australian-made sunglasses, but the standard also maintained requirements considered specific to Australia's climate.
|
